Miscellaneous Controls

Various additional functions are on this page:

Log Message inserts the specified message into the Imagestore’s log file. Use this to hold short notes about Imagestore misbehaviour, or changes in the configuration. The log files are typically for the use of Miranda support personnel.

The Voltages and Temperature section give a continuous display of the Imagestore’s internal temperature and voltages.

The GPIs Section displays status of the GPI inputs for both audio and video layers, and a context menu accesible from the right mouse button allows you to switch GPI outputs on and off, and to trigger the events associated with GPI input changes. If you have Rascular’s GPI Manager software installed, you can also lauch it here to graphically edit the GPI macros directly via the network.

Imagestore Message Log inserts the specified message into the Imagestore’s log file. Use this to hold short notes about Imagestore misbehaviour, or changes in the configuration. The log files are typically for the use of Miranda support personnel.

Preview Selection

You can select the signal to be shown on the Imagestore’s preview output.

Video Settings

The Imagestore can be set to pass or block close caption data

Serial Baud Rates

Baud rates for serial automation ports can be viewed and set here. Beware that doing this can cause havoc with your station automation system if used incorrectly.

Raw Command Test

This can be used to send a ‘raw’ command to the Imagestore, which can be useful while debugging circumstances.